Saltwater Trolling Motors

Trolling Motors For The Sea

Saltwater trolling motors are a popular way to power small fishing boats and other seafaring craft. Because they are built t withstand the rigors of the ocean, they are more powerful than freshwater trolling motors and so enable you to pull in much larger fish and they are also more durable and so last longer as well.

Trolling motors come in both saltwater and freshwater varieties; so its important that you pick which is best for you based on where you will be using it most often.

If you’re not sure about what features to look for when purchasing one, we’ve got some recommendations below that might help!

What is a saltwater trolling motor and how does it work?

A saltwater trolling motor is a small engine that propels your boat through the water by using a powerful electric motor. The more power you need to get going or move at higher speeds, the larger diameter and pitch angle blade on top of your shaft will be.

In general, these motors have a lower voltage requirement than freshwater motors and are designed to work in saltwater environments. They are often bow or transom-mounted but, really, can be attached almost anywhere on your boat depending on the maneuverability you require.

Saltwater trolling motors, as you have probably deduced from the name, should only be used in salt-water environments. They also have thinner shafts and blades to help reduce the amount of drag caused by waves in saltwater.

What are the different kinds of saltwater trolling motors?

There are four types of trolling motors, and the one you choose will depend on your specific needs. The most popular type is a transom-mounted bow thruster with an inline shaft design (or I/S). This setup has both power and speed control, which some people find helpful as they can switch between moving in reverse or forward.

The other popular type of motor is a transom-mounted, side shaft design with inline control (or T/S). This setup has power and speed controls on the side rather than inline.

A bow thruster trolling motor mounts to the front of your boat, giving you more maneuverability when docking or near obstacles in shallow water.

It also has both power and speed control, so you can switch between moving forward or backward.

A side shaft trolling motor mounts to the back of your boat but doesn’t have the same maneuverability options that a bow thruster has.

The other two types of motors are transom-mounted stern drives with inline designs (or O/S) and transom-mounted stern drives with side shaft designs (or O/S). These types of motors are generally found on larger boats, but they have more power than the bow thruster.

 

The Benefits of Using a Saltwater Trolling Motor

Saltwater trolling motors are a great choice for bigger boats that need power but, of course, they are equally good on smaller craft. They tend to have more features than freshwater models, but the extra features and the additional saltwater protection they have all add to the weight (and the cost!0so bear that in mind.

Since saltwater is corrosive, these motors need to be made of different materials than freshwater motors. This means that the shafts are often thinner to reduce drag, and they may not have as many exposed metal parts on them.

Of course, mainly due to the harsher environments they are used in, it’s essential to maintain your saltwater trolling motor, as it will need to be cleaned more than a freshwater motor.

Additionally, the battery should be inspected and eventually replaced after about three years of use or whenever the power starts to drop off.

What to Consider before buying a saltwater trolling motor

There are several factors to consider when choosing the right motor for your boat.

The first is how much power you need, as this will determine how fast and far you can go while trolling.

You also have to think about what type of water you’ll be in most often and what conditions the motor will be used in. For example, will you use it mostly in saltwater or freshwater, and will it be used inshore, out at sea or in lakes and rivers?

Finally, you should consider how much weight your boat can carry, as this will help determine which size motor you need.

The length of the shaft will¬† also determine how much weight your boat can carry, something you should keep in mind. The shape of the propeller tip – which will be either a bullet or triangle design – also determines how easily it’ll get around obstacles in shallow water.

As we have said, saltwater trolling motors are more powerful and more durable than freshwater models, but there is a lot of maintenance involved to keep them running! If you’re not looking for something with high maneuverability or need to frequently go into shallow water, then you might want to consider a freshwater trolling motor instead.

Read OUr Reviews

Get the best deals on trolling motors right now.